Expert Answers about Land Rover Evoque
- Trailer Wiring Harness Compatible with 2015 Range Rover Evoque
- The trailer wiring harness to add a 4-way connector on your 2015 Land Rover Evoque is the Tekonsha ZCI Circuit Protected Wring Harness # 119250KIT.
The ZCI (Zero-Contact Interface) requires no cutting or splicing into your Land Rover's wiring. It bypasses the wiring system by clamping sensors onto the individual wires of the tail light harness that detect when power is running through the circuit. This way there is no tampering with your Evoque's system and there's no chance of feedback...
view full answer... - Does Curt Echo Brake Controller Work With 2021 Land Rover Range Rover Evoque
- Yes, your 2021 Land Rover Range Rover Evoque is 100 percent compatible for use with the Curt Echo Wireless Trailer Brake Controller # C51180.
The Echo does not require the use of the brake wire, it only needs the 7-way to have the 12 volt, ground, and turn signals in order to work properly. It doesn't use the turn signals to indicate the brakes are on, but instead it has an accelerometer that senses your vehicle's deceleration and activates the trailer brakes accordingly.
I have added...
view full answer... - Will a Pullrite SuperGlide 5th Wheel Trailer Hitch Fit the Reese Adapter # RP30156
- There is more than one version of the Pullrite SuperGlide 5th wheel trailer hitch. If it is the one that states it is an ISR (stands for industry standard rails) then it is possible that it will fit Reese adapter # RP30156. The distance between the mounting feet of the hitch will have to be either 20-1/2 inches apart on center or 29 inches apart on center, side to side. And they will have to 22 inches apart on center front to back.
view full answer... - Will etrailer.com Trailer Hitch Receiver Lock Fit a 2013 Land Rover Evoque
- Since the factory hitch for the Evoque is a 1-1/4 inch Class I or II the trailer hitch receiver lock # e98879 will fit. Hitches that are 1-1/4 inches have a 1/2 inch diameter pin hole which is what this pin fits.
The inside span is 1-5/8 inches long and the overall length is 5 inches. With these measurements you can check the space available around the outside of the receiver to ensure fit.
view full answer... - Will WeatherTech Floor Mat # WT444041 Fit 2012 Evoque Land Rover Trim Models Dynamic,Pure,Prestige
- The WeatherTech Floor Mat # WT444041 is sold as a pair including both the drivers and passengers side mats. My technical contact at WeatherTech confirmed that this mat will fit all three Land Rover Evoque trims, Dynamic, Pure and Prestige.
view full answer... - Fit of Curt Class III Trailer Hitch on 2015 Land Rover Evoque
- The Curt Class III hitch you've referenced, part # C13128 will indeed fit a 2015 Land Rover Evoque.
If you'll be using the hitch for towing purposes, you might be interested in the following items to complete your towing set-up:
Trailer wiring harness with 4-pole trailer connector, part # C56159
Ball mount, part # C45030
1-7/8 inch trailer ball, part # 19260 or 2 inch diameter ball, part # 63845
Hitch pin and clip, part # PC3
Locking hitch pin, part # e98882
I've linked you to a video...
view full answer... - Trailer Wiring Harness Fit for 2017 Land Rover Evoque
- I double-checked with the manufacturer, Tekonsha, and the wiring harness you mentioned will not fit a 2017 Land Rover Evoque.
The only option for a trailer wiring harness for your 2017 Evoque is the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT.
This harness does not require any splicing or cutting into your Land Rover's wiring, it uses a clamping system for a clean install. I have added a link to the instructions and a video review for you to check out as well.
view full answer... - Does Kuat NV 2.0 Bike Rack Work With 2 Inch Draw-Tite Trailer Hitch Receiver
- Thanks for the purchase of the Draw-Tite Max-Frame 2" Trailer Hitch Receiver # 75227 for your 2013 Land Rover Evoque, and the answer is yes, you can absolutely use the NV 2.0 bike rack you asked about, which is the following part number:
- Kuat NV 2.0 Bike Rack for 2 Bikes # NV22G
The NV 2.0 # NV22G is 100 percent compatible with all 2" Draw-Tite hitches, including the one for your Land Rover, and includes everything needed to install the rack in the hitch, so you don't have to purchase...
view full answer... - Does The Draw-Tite # 75227 Fit The Evoque convertible?
- The Draw-Tite Max-Frame Trailer Hitch Receiver # 75227 is confirmed by Draw-Tite to fit your 2018 Land Rover Evoque Convertible.
I recommend installing the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT in case you ever will be towing or needing auxiliary lights on the rear of your hitch mounted accessory. This kit does not require splicing into your vehicles tail lights like some others will.
view full answer... - Best Trailer Wiring Harness for a 2018 Land Rover Evoque HSE Dynamic
- For your 2018 Land Rover Evoque HSE Dynamic, I recommend using the ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT which is going to be the only confirmed option we have for you that does not require splicing into the vehicle's tail lights. The Curt T-Connector Vehicle Wiring Harness part # C56159 is not a confirmed fit.
I understand the preferred method for you would be the inexpensive plug and play wiring harness but unfortunately that is not an option for your vehicle...
view full answer... - Recommended Hitch and Platform Bike Carrier to Use on 2014 Land Rover Evoque
- I'll start off by saying that the first thing you need is a hitch receiver on your vehicle in order to carry the bike rack. I recommend using the Curt Trailer Hitch Receiver # C13128 which will provide you with a durable hitch to carry any potential bike rack. This hitch has a 2" receiver on it which will provide you with a greater variety of hitch mounted accessories that can be used.
When it comes to a bike rack, your choice of going with a platform rack is a good start considering...
view full answer... - Items Needed To Tow A Small Cargo Trailer With A 2013 Land Rover Evoque
- Yes, we currently have the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 you could use and we also carry all the accessories you'll need to tow a trailer. The first thing you'll need to tow a small cargo trailer with your 2013 Land Rover Evoque is a trailer hitch receiver. If you do not have one then I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13128. Curt manufactures their hitches in the US and are known for their quality and long lasting powder...
view full answer... - Can Saris Freedom Bike Rack Fit with Trek Verve E-Bikes
- From what I can see I believe the Saris Freedom 2 Bike Platform Rack # SA4412B will be compatible with your two Trek Verve E-Bikes as long as they are the Verve+ 2. Since you'll need to remove the battery during transport I believe the rubber cradles will fit with that middle frame section, but since the battery for the Verve+ 3 is integrated into the frame I kind of doubt the cradles will fit even if you remove the battery.
If you do have the Verve+ 3 bikes then the Hollywood Racks Sport...
view full answer... - 2016 Land Rover Evoque Trunk Mounted Bike Rack
- For your 2016 Land Rover Evoque there are currently 2 bike rack options that are confirmed to fit your vehicle. The Yakima HangOut 2 Bike Rack # Y02637 and the 3 bike # Y02638 are your options. They have a reduced weight capacity on your vehicle due to the rear spoiler. The limit is 60 lbs for 2 bikes and 90 lbs for 3 bikes which is a reduction of 5 lbs per bike from the rack capacity.
With either of these racks, I recommend adding the Security Strap for Yakima Trunk Mounted Bike Carrier...
view full answer... - If a Hitch Isn't Rated for Weight Distribution Does that Mean the Vehicle Isn't Either
- Typically if a hitch isn't rated for weight distribution that also means the vehicle isn't rated for it either. You can check your owners manual to confirm this.
If a vehicle wasn't rated for a WD system Curt wouldn't be able to safely test a WD system on that vehicle with their hitch so the two usually go hand in hand.
The Curt Hitch part # C13128 that you referenced is not rated for a WD system so chances are your vehicle isn't either.
view full answer... - Wiring Harness For 2018 Land Rover Range Rover Evoque HSE
- There isn't a plug-in type of 4-way for your 2018 Land Rover Range Rover Evoque HSE. The only option for your vehicle is a universal kit, the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT.
view full answer...
Go To Results